-
Aguilar M, Becks H, Baktheer A et al.
(2022):
Effect of lateral confinement on concrete fatigue life under shear loading,
Computational Modelling of Concrete and Concrete Structures, 154-161.
-
Aguilar M, Baktheer A, Chudoba R
(2021):
Numerical investigation of load sequence effect and energy dissipation in concrete due to compressive fatigue loading using the new microplane fatigue model MS1,
Proceedings of the 16th International Conference on Computational Plasticity, pp 1–12.
-
Becks H, Aguilar M, Baktheer A et al.
(2021):
Experimental and numerical investigations on the fatigue behavior of high-strength concrete under combined shear-compression loading,
Proceedings of IABSE Symposium: Challenges for Existing and Oncoming Structures, 532–540.
-
Patel R., Scheiden T., Hüpgen M., Rozanski C., Löhnert S., Oneschkow N.
(2021):
Simulating 3D crack propagation with XFEM to investigate failure mechanism in high strength concrete,
PAMM 2021
DOI:
10.1002/pamm.202000296
-
Storm, J.; Kaliske, M.
(2020):
Phase-field Fracture with Representative Crack Elements at Finite Deformations,
7th GAMM Workshop on Phase-Field Modeling, Kaiserslautern
-
M. Pise, D. Brands, G. Gebuhr, M. Sarhil, J. Schröder, S. Anders
(2019):
Numerical calibration of elasto-plastic phase-field modeling of fracture for experimental pullout tests of single steel fibres embedded in high-performance concrete,
Proceedings of the Seventh International Conference on Structural Engineering, Mechanics and Computation (SEMC)
-
G. Gebuhr, M. Pise, M. Sarhil, S. Anders, D. Brands, J. Schröder
(2019):
Deterioration development of steel fibre reinforced high performance concrete in low-cycle fatigue,
Proceedings of the Seventh International Conference on Structural Engineering, Mechanics and Computation (SEMC)
-
G. Gebuhr, M. Pise, M. Sarhil, S. Anders, D. Brands, J. Schröder
(2019):
Description and analyses of pull-out behaviour of hooked steel fibres embedded in high performance concrete using phase-field modeling,
Derkowski, W. et al. (Ed.): Proceedings of the fib Symposium 2019, 27.-29.05.2019 in Kraków (Polen), pp. 889-896 (full paper digital)
-
M. Pise, D. Brands, G. Gebuhr, M. Sarhil, J. Schröder, S. Anders
(2019):
Phase-field modeling of steel fiber reinforced high-performance concrete considering failure,
VI International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Braunschweig
-
M. Pise, D. Brands, G. Gebuhr, M. Sarhil, J. Schröder, S. Anders
(2019):
Elasto-plastic phase-field model for pullout tests of steel fiber embedded in high-performance concrete: numerical calibration and experimental validation,
Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Wien
-
Schäfer, N.; Breitenbücher, R.
(2019):
Pull - Out tests of carbon and high-strength steel microfibres in a cement-based matrix,
Derkowski, W. et al. (Ed.): Proceedings of the fib Symposium 2019, 27.-29.05.2019 in Krakau (Polen), pp. 1888-1895 (full paper digital)
-
Gudžulić V., Timothy J.J.., Schäfer N., Breitenbücher R., and Meschke G.
(2019):
Computational modeling of damage evolution in concrete due to cyclic loading. VI International Conference on Computational Modeling of Fracture and Failure of Materials and Structures,
VI International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, CFRAC 2019, 12.07. - 14.07.2019 in Braunschweig, Germany (Abstract)
-
Gudžulić, V., Timothy J.J.., and Meschke G.
(2019):
Computational modeling of damage evolution in short fibre-reinforced concrete due to cyclic loading,
XV International Conference on Computational Plasticity. Fundamentals and Applications. COMPLAS 2019, 03.09. - 05.09. 2019, Barcelona, Spain (Abstract)
-
Ambati M, Carrara P, De Lorenzis L
(2019):
A phase-field approach to high cycle fatigue simulation.,
International conference on computational modeling of fracture and failure of materials and structures (CFRAC) - Braunschweig, Germany
-
Carrara P, Ambati M, Alessi R, De Lorenzis L
(2019):
Modeling of fatigue crack growth phenomena using the variational phase-field approach.,
CFRAC - Braunschweig, Germany
-
Ambati M, Carrara P, Alessi R, De Lorenzis L
(2019):
Phase-field modeling and simulation of fatigue phenomena in brittle materials.,
International association of applied mathematics and mechanics (GAMM) - Vienna, Austria
-
Carrara P, Ambati M, Alessi R, De Lorenzis L
(2019):
A new framework to simulate fatigue fracture in brittle materials.,
GAMM - Vienna, Austria
-
Ambati M, Carrara P, Alessi R, De Lorenzis L
(2019):
Phase-field modeling and simulation of fatigue phenomena in brittle materials.,
6th GAMM workshop on phase-field modeling - Karlsruhe, Germany
-
Carrara P, Ambati M, Alessi R, De Lorenzis L
(2019):
A variational phase-field approach to fatigue in brittle materials.,
BIRS workshop phase-field models of fracture - Banff, Canada
-
Carrara P, Ambati M, De Lorenzis L
(2019):
A variational phase-field framework to model fatigue effects.,
8th GACM colloquium on computational mechanics - Kassel, Germany
-
Rybczynski, S.; Dosta, M.; Schaan, G.; Ritter, M.; Schmidt-Döhl, F.
(2019):
DEM Simulation and electron microscopy analysis of the fatigue behavior of ultra-high performance concrete.,
Seventh Int. Conf. on Structural Engineering, Mechanics and Computation SEMC, 2.-4.9.2019, Cape Town, South Africa, ID 285
-
Rybczynski, S.; Dosta, M.; Schmidt-Döhl, F.
(2019):
DEM calibration for modelling of the fatigue behavior of ultra-high-performance concrete.,
90th Annual Meeting of the International Association of Applied Mathematics and Mechanics. GAMM 2019. 18.-22.2.2019, Wien, ID 233
-
Rybczynski, S.; Schaan, G.; Dosta, M.; Ritter, M.; Schmidt-Döhl, F.
(2019):
Experimental and numerical investigations of the fatigue behavior of ultra-high-performance-concrete.,
fib Symposium 2019, Concrete - Innovations in Materials, Design and Structures, Krakau, 27.-29.5.2019, ID 1220
ISBN:
978-294064300-4
-
Schaan, G.; Rybczynski, S.; Ritter, M.; Schmidt-Döhl, F.
(2019):
Transmission electron microscopy investigations of fatigue-induced changes in the cement binder structure of ultra-high performance concrete,
Microscopy Conference 2019, 2.-5.9.2019, Berlin. ID MS7.003
-
Schaan, G.; Rybczynski, S., Ritter, M.; Schmidt-Döhl, F.
(2019):
Transmission electron microscopy investigations of fatigue induced changes in the cement structure of ultra-high performance concrete.,
41st. Int. Conf. on Cement Microscopy 2019, 14.-17.4.2019, San Diego, USA.
-
Empelmann, M.; Oettel, V. und Lanwer, J.-P.
(2019):
Experimental investigations of UHPC, steel fibres and embedded steel fibres under cyclic tensile loading,
Proceedings of the International Conference on Sustainable Materials, Systems and Structures (SMSS2019) "Durability, Monitoring and Repair of Structures", Rovinj, Croatia, 20.-22.03.2019.
-
Lanwer, J.-P.; Oettel, V.; Empelmann, M.; Höper, S.; Kowalsky, U.; Dinkler, D.
(2019):
Degradation Processes of UHPFRC under Cyclic Tensile Loading.,
Derkowski, W. et al. (Ed.): Proceedings of the fib Symposium 2019, 27.-29.05.2019 in Krakau (Polen), S. 1912-1919 (full paper digital).
-
Höper, S.; Kowalsky, U.; Dinkler, D.
(2019):
Bond behaviour of steel microfibres embedded in UHPC.,
CFRAC Conference, Braunschweig, Germany, 2019, June 12th to 14th.
-
Höper, S.; Kowalsky, U.; Dinkler, D.; Lanwer, J.-P.; Oettel, V.; Empelmann, M.
(2019):
Experimental and numerical investigations of UHPFRC under cyclic tensile loading.,
Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019) in Kapstadt, Südafrika, 02.-04.09.2019, S. 1462-1467.
-
M. Rutzen, D. Volkmer, L. Reischmann, U. Weiß, M. A. Peter, P. Lauff, O. Fischer, M. Raith, C. Große
(2019):
Microstructural analysis of crack growth caused by static and dynamic loads in a carbon fiber reinforced cement paste,
International Conferences on Structural Engineering, Mechanics and Computation (SEMC), Cape Town
-
T. Wolfer; M. A. Peter
(2019):
Homogenization of linear elasticity with slip-displacement conditions,
Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Wien
-
T. Wolfer; M. A. Peter
(2019):
Homogenization of linear elasticity with slip-displacement conditions,
International Conference on Elliptic and Parabolic Problems, Gaeta
-
P. Lauff, M. Raith, C. Große, M. Rutzen, D. Volkmer, L. Reischmann, U. Weiß, M. A. Peter, O. Fischer
(2019):
Investigation of Localized Damage Indicators of a Carbon Short-Fibre Reinforced High Performance Concrete under Dynamic and Flexural Load,
fib Symposium 2019 "Concrete - Innovations in Materials, Design and Structures", Krakow
-
P. Lauff, M. Raith, C. Große, M. Rutzen, D. Volkmer, L. Reischmann, U. Weiß, M. A. Peter, O. Fischer
(2019):
Investigation of Localized Damage Indicators of a Carbon Short-Fibre Reinforced High Performance Concrete under Dynamic and Flexural Load,
Proceedings of the fib Symposium 2019 Concrete - Innovations in Materials, Design and Structures, pp. 1952-1959
ISSN:
2617-4820
-
U. Weiß, L. Reischmann, P. Lauff, O. Fischer, M. Raith, C. Große, M. Rutzen, D. Volkmer, M. A. Peter
(2019):
A multiscale approach to localized damage indicators of a short-fibre reinforced high performance concrete,
VI International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Braunschweig
-
M. Rutzen, D. Volkmer, L. Reischmann, U. Weiß, M. A. Peter, P. Lauff, O. Fischer, M. Raith, C. Große
(2019):
Microstructural analysis of crack growth caused by static and dynamic loads in a carbon fiber reinforced cement paste,
International Conferences on Structural Engineering, Mechanics and Computation (SEMC), Cape Town
-
Caggiano, A., Said Schicchi, D., Harenberg, S., Pahn, M., Dehn, F., and Koenders, E.A.B.
(2019):
A unified multiscale modelling approach for concrete fatigue with microscale damage-mechanism implementations,
Proceedings of 90th Annual Scientific Conference - GAMM 2019, February 18-22, Vienna, Austria
-
Tomann, C.; Lohaus, L.
(2019):
Influence of water in the microstructure on the fatigue deterioration of high-strength concrete,
Proceedings of SEMC2019: The seventh international conference on structural engineering, mechanics and computation, Cape Town, South Africa, 02-04 September, 2019
-
Tomann, C.; Lohaus, L.; Aldakeel, F.; Wriggers, P.
(2019):
Influence of water-induced damage mechanisms on the fatigue deterioration of high-strength concrete,
Proceedings of the fib Symposium 2019: CONCRETE - INNOVATIONS IN MATERIALS, DESIGN AND STRUCTURES, pp. 1944-1951, Krakow, Poland, 27-29 May, 2019
-
Fadi Aldakheel, Christoph Tomann, Ludger Lohaus and Peter Wriggers
(2019):
Water-induced failure mechanics for concrete: Micro-mechanical model, experimental observation and phase-field coupling,
International association of applied mathematics and mechanics (GAMM) - Vienna, Austria
-
Fadi Aldakheel, Peter Wriggers
(2019):
Water-induced failure mechanics for concrete,
International conference on computational modeling of fracture and failure of materials and structures (CFRAC) - Braunschweig, Germany
-
Fadi Aldakheel, Peter Wriggers
(2019):
Virtual Element Formulation For Phase-Field Modeling of Brittle and Ductile Fracture,
COLLOQUIUM 600, NEW CHALLENGES IN FINITE ELEMENT TECHNOLOGY – FROM THE PERSPECTIVE OF MECHANICS AND MATHEMATICS, Aachen, Germany
-
F. Aldakheel, N. Noii , T. Wick and P. Wriggers
(2019):
An adaptive global-local approach for phase-field modeling of anisotropic brittle fracture,
2nd ECCOMAS Thematic Conference on Modern Finite Element Technologies Mathematical and Mechanical Aspects (MFET 2019), Bad Honnef, Germany
-
Karlo Seleš, Fadi Aldakheel, Nenad Gubeljak, Jurica Sorić, Zdenko Tonković and Peter Wriggers
(2019):
Phase-field model for high cycle fatigue life prediction of brittle materials,
International conference on computational modeling of fracture and failure of materials and structures (CFRAC) - Braunschweig, Germany
-
F. Aldakheel, N. Noii , T. Wick and P. Wriggers
(2019):
An adaptive global-local approach for phase-field ductile fracture,
XV International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS 2019), Barcelona, Spain
-
J. Storm, D. Supriatna, M. Kaliske
(2019):
On the analysis of crack-closure behaviour using the phase-field method together with the novel concept of Representative Crack Elements,
Proceedings in Applied Mathematics and Mechanics
-
M. Ranjbarian and V. Mechtcherine
(2019):
Pilot investigation into crack bridging behaviour of different types of high-performance microfibres under reversed tension-compression loading,
Proceedings of the fib Symposium 2019, Concrete - Innovations in Materials, Design and Structures, 2019, pp. 121-128
-
J. Storm, M. Kaliske, M. Ranjbarian, V. Mechtcherine
(2019):
Modelling of fibre-reinforced concrete by a fibre super-element overlay mesh,
Proceedings of The Seventh International Conference on Structural Engineering, Mechanics and Computation
-
M. Ranjbarian, V. Mechtcherine, J. Storm, and M. Kaliske
(2019):
Influence of fibre orientation on pull-out behaviour of PVA microfibre embedded in cement-based matrix under monotonic and cyclic loading,
SEMC 2019: The seventh international conference on structural engineering, mechanics and computation
-
Tran, N.L.; Deutscher M.; Scheerer, S.
(2019):
An investigation of the heat generated during cyclic loading of ultra-high performance concrete,
Proceedings in Applied Mathematics and Mechanics (PAMM)
DOI:
10.1002/pamm.201900469
-
Deutscher, M.; Tran, N.L.; Scheerer, S.
(2019):
Experimental investigation of load-induced temperature development in UHPC subjected to cyclic loading,
Proceedings of the 6th International fib Symposium, Krakow, Poland, 27–29 May 2019
-
Tran, N.L.; Deutscher, M.; Scheerer, S.
(2019):
Analysis of load-induced temperature development in UHPC under cyclic compressive loading,
Zingoni (Ed.) Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering (SEMC), Mechanics and Computation, Cape Town, South 2–4 Africa, September 2019.Taylor & Francis Group, London, 2019, p.1397-1402.
-
Deutscher, M.; Tran, N.L.; Scheerer, S.
(2019):
Experimental investigation of load-induced increase of temperature in UHPC,
Zingoni (Ed.) Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC), Cape Town, South 2–4 Africa, September 2019.Taylor & Francis Group, London, 2019, p.1450-1455.
-
Josef Sauer, Jana Musialak, Holger Steeb
(2019):
Characterizing High Performance Concrete in the Frequency Domain,
Validation Experiments GAMM 2019 / Proceedings in Applied Mathematics and Mechanics - 90th GAMM Annual Meeting – Wien
-
Markert, M., Birtel, V., Garrecht, H.
(2019):
Temperature and humidity induced damage processes in concrete due to pure compressive fatigue loading,
Proceedings of the fib Symposium, Krakow, 2019
-
Josef Sauer, Martin Markert, Jana Musialak, Veit Birtel, Holger Steeb, Harald Garrecht
(2019):
Experimental characterization of effective mechanical properties of (micro-) fractured high performance concrete,
SEMC 2019 (The Seventh International Conference on Structural Engineering, Mechanics and Computation) / SEMC, Cape Town, 2019
-
Markert, M., Birtel, V., Garrecht, H.
(2019):
Influence of concrete humidity on the temperature development under fatigue compressive loading,
Proceedings of the 7th International Conference of Euro Asia Civil Engineering Forum, Stuttgart, 2019
-
Scheiden, T.; Oneschkow, N.; Loehnert, S.; Patel, R.
(2019):
Fatigue damage of high-strength concrete with basalt aggregate,
Proceedings of the fib Symposium 2019: Concrete - innovations in materials, design and structures, pp. 1896-1903, Krakow, Poland, 27-29 May, 2019
-
Scheiden, T.; Oneschkow, N.; Loehnert, S.; Patel, R.
(2019):
Acoustic emission due to fatigue damage mechanisms in high-strength concrete with different aggregates,
Proceedings of SEMC2019: The seventh international conference on structural engineering, mechanics and computation, Cape Town, South Africa, 02-04 September 2019
-
Patel R., Löhnert S. , Scheiden T., Oneschkow N.
(2019):
Investigation of Failure Mechanisms in High Strength Concrete using 3D-XFEM,
GAMM 2019 - Wien
-
Patel R., Löhnert S. , Scheiden T., Oneschkow N.
(2019):
Investigation of Failure Mechanisms in High Strength Concrete using 3D-XFEM,
VI International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC - Braunschweig)
-
Supriatna, D.; Storm, J.; Kaliske, M.
(2019):
An anisotropic phase-field model based on a Representative Crack Element (RCE),
Proceedings of the 8th GACM Colloquium on Computational Mechanics, Kassel
-
Storm, J.; Supriatna, D.; Kaliske, M.
(2019):
Method of Representative Crack Elements for Phase-field Fracture with Finite Deformations and Dissipative Material Behaviour,
VI International conference on computational modelling of fracture and failure of materials and structures (CFRAC 2019), Braunschweig
-
Supriatna, D.; Storm, J.; Kaliske, M.
(2019):
Modelling of brittle fracture of concrete material by the phase-field approach and Representative Crack Elements (RCE),
VI International conference on computational modelling of fracture and failure of materials and structures (CFRAC 2019), Braunschweig
-
Steinke, C.; Yin, B.; Storm, J.; Kaliske, M.
(2019):
Phasefield models with anisotropy and dissipative features,
5th German-Japanese Workshop on Computational Mechanics, Dresden
-
M. Pise, D. Brands, G. Gebuhr, J. Schröder, S. Anders
(2018):
Analysis of pullout behavior of single steel fibers embedded in concrete using phase-field modeling,
Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Munich
-
Gudžulić, V., Khisamitov, I., Timothy, J. J., and Meschke, G.
(2018):
Simulation‐based investigation of the influence of the micro‐structure and disorder on damage evolution in concrete,
PAMM, 18(1)
-
Schäfer, N.; Przondziono, R.; Breitenbücher, R.
(2018):
Microstructural degradation in cementitious materials induced by cylic loading,
2nd Materials Chain International Conference, MCIC 2018, 12.11.-14.11.2018 in Bochum (Abstract Book)
-
Ambati M, Carrara P, Alessi R, Vidoli S, De Lorenzis L
(2018):
A phase-field model for the description of fatigue phenomena.,
5th GAMM workshop on phase-field modeling - Dresden, Germany
-
De Lorenzis L, Alessi R, Ambati M, Carrara P, Kruse R, Wu T
(2018):
Phase-field modeling and computation of fracture and fatigue.,
Plenary talk by Prof. Dr.-Ing. Laura De Lorenzis at GAMM - Münich, Germany
-
Ambati M, Carrara P, Alessi R, Vidoli S, De Lorenzis L
(2018):
A phase-field model for the description of fatigue phenomena.,
GAMM - Münich, Germany
-
De Lorenzis L
(2018):
Recent research results on the phase-field approach to fracture.,
Semi-plenary lecturer by Prof. Dr.-Ing. Laura De Lorenzis at 6th European conference on computational mechanics - Glassgow, UK
-
Carrara P, Ambati A, Alessi R, De Lorenzis L
(2018):
Simulation of Fatigue Crack Growth and Failure Using a Variational Phase-Field Model.,
13th World congress in computational mechanics - New York, USA
-
Carrara P, Ambati A, Alessi R, De Lorenzis L
(2018):
A phase-field model for brittle fatigue fracture.,
Current trends and open problems in computational solid mechanics - Hannover, Germany
-
Carrara P, Ambati A, Alessi R, De Lorenzis L
(2018):
A new variational phase-field framework to simulate fatigue Fracture.,
31st International workshop research in mechanics of composite - Bad Herrenalb, Germany
-
Schaan, G.; Li, L.; Ritter, M.; Schmidt-Döhl, F.
(2018):
Probing ultra-high performance concrete with advanced electron microscopy.,
19th Int. Microscopy Congress, 9.-14.9.2018, Sydney, Australien. ID 901
-
Schaan, G.; Li, L.; Ritter, M.; Schmidt-Döhl, F.
(2018):
Crack formation in Ultra High Performance Concrete investigated by electron microscopy.,
19th Int. Microscopy Congress, 9.-14.9.2018, Sydney, Australien. ID 901.
-
Höper, Svenja; Kowalsky, Ursula; Dinkler, Dieter
(2018):
Mikrophysikalisch begründete Modellierung der Verbundwirkung in faserbewehrtem Ultrahochleistungsbeton (UHPFRC) unter zyklischer Zugbeanspruchung.,
Jens Schneider und Nihat Kiziltoprak (Hg.): Forschungskolloquium 2018 Grasellenbach. Baustatik-Baupraxis e.V. Wiesbaden: Springer Fachmedien Wiesbaden, S. 35-36
-
Höper, Svenja; Kowalsky, Ursula; Dinkler, Dieter
(2018):
Micro‐structure related modelling of ultra‐high‐performance fibre reinforced concrete (UHPFRC) subjected to cyclic tensile loading.,
In: PAMM 18 (1), S. 1-4
DOI:
10.1002/pamm.201800375
-
T. Wolfer; M. A. Peter
(2018):
Homogenization of linear elasticity with slip-displacement conditions,
Third German-Russian-American Workshop on Numerical Methods and Mathematical Modelling in Geophysical and Biomedical Sciences, Herrsching am Ammersee
-
P. Lauff, O. Fischer
(2018):
Carbonfaserverstärkung kombiniert mit der ausrichtenden Wirkung des 3D-Drucks,
Kongressunterlagen 62. BetonTage, BFT International Vol. 84, 02/2018, p. 96
-
P. Lauff, O. Fischer, N. Peppler
(2018):
Zum Trag- und Ermüdungsverhalten von im 3D-Druck hergestellten Carbon-Kurzfaserbeton mit hoher Zugfestigkeit,
Beiträge zur 6. DAfStb-Jahrestagung mit 59. Forschungskolloquium, pp. 103-113
-
P. Lauff, O. Fischer
(2018):
Hochdruck- und -zugfeste Betonbauteile durch 3D-druck und gerichtete Carbonkurzfasern - Herstellung und Versuche zum Tragverhalten und zur Ermüdung,
22. Münchener Massivbau Seminar, pp. 51-58
-
Harenberg, S., Caggiano, A., Koenig, A., Said, D., Gilka‐Bötzow, A., Schultz‐Cornelius, M., ... & Koenders, E.
(2018):
Micromechanical behavior of UHPC under cyclic bending‐tensile loading in consideration of the influence of the concrete edge zone,
PAMM, 18(1), e201800363
-
Fadi Aldakheel
(2018):
Virtual Elements For Engineering Applications,
COMMAS Graduation Ceremony 2018, Stuttgart, Germany
-
F Aldakheel, B Hudobivnik, P Wriggers
(2018):
Gradient-Thermo-Plasticity using an Efficient Virtual Element Method (VEM),
9th International Congress of Croatian Society of Mechanics, Split, Croatia
-
M. Ranjbarian, V. Mechtcherine
(2018):
Cyclic Damage on PVA Microfibre Embedded in Cementitious Matrix in Alternating Tension-Compression Regime,
3rd FRC INTERNATIONAL WORKSHOP FIBRE REINFORCED CONCRETE, from Design to Structural Applications
-
M. Pise, D. Brands, G. Gebuhr, J. Schröder, S. Anders
(2018):
Analysis of pullout behavior of single steel fibers embedded in concrete using phase-field modeling,
Proceedings in Applied Mathematics and Mechanics, PAMM 18 (1)
DOI:
10.1002/pamm.201800401
-
Alessi R, Ambati M, Vidoli S, De Lorenzis L
(2017):
Modeling fatigue phenomena with a variational phase-field approach.,
Keynote talk at 7th GACM colloquium on computational mechanics - Stuttgart, Germany
-
P. Lauff, O. Fischer, M. Rutzen, D. Volkmer
(2017):
Carbonkurzfaserbeton - Eine neuartige Komposition mit gezielter Faserausrichtung beeindruckt durch signifikante Steigerung der Zugfestigkeit,
Beiträge zur 5. DAfStb-Jahrestagung mit 58. Forschungskolloquium, 2017, pp. 121-133
ISBN:
978-3-00-057267-8
